Search This Blog

Tuesday 17 January 2012

Review Article

Toward a Theoretical Concept of E-Collaboration through Project Management in SMEs for Reducing Time and Cost in New Product: A Review
M. Mohammadjafari, S.Z.M. Dawal, S. Ahmed and H. Zayandehroodi
ABSTRACT
Reducing time and efficient project execution is an objective in many industries and project management is one of the important keys for lead the company to this allegation. The project manager needs some tools for lead the firm to the success. Collaboration is one way to success and collaboration has many types, one kind is electronic collaboration. On the other hand, small and Medium Size Enterprises (SMEs) are a part of manufacturing industries. Combining a literature review with our empirical experience we found that relationship between the project manager and related departments for production is essential for reducing time and cost in new product development. In this study, we describe about some definition of project management, E-collaboration, SMEs and new product and review some articles around this area.
How to cite this article:

M. Mohammadjafari, S.Z.M. Dawal, S. Ahmed and H. Zayandehroodi, 2011. Toward a Theoretical Concept of E-Collaboration through Project Management in SMEs for Reducing Time and Cost in New Product: A Review. Journal of Applied Sciences, 11: 174-182.

DOI: 10.3923/jas.2011.174.182

URL: http://scialert.net/abstract/?doi=jas.2011.174.182
Received: August 16, 2010; Accepted: September 30, 2010; Published: November 10, 2010

INTRODUCTION

Manufacturing industries play a vital role in many countries. SMEs are a part of manufacturing industries, but they have some limitation for attending and also for remaining in the market, especially in the global market (Mohammadjafari et al., 2010a). SMEs cannot compete with big companies, unless, they attend to customer needs. Small and medium size enterprises (SMEs) are the driving engine behind economic growth (Mohammadjafari et al., 2010b). SMEs play a very important role in national economies, providing job opportunities, act as supplier of goods and services to large organizations and any lack of product quality could adversely affect the competitive ability of the larger organizations (Deros et al., 2006). In this end, they need to increase new product but almost the time for new product is more than first estimation. One of the ways for reduces time and cost in new product is collaborative between different departments of one factory. By investigation in the prior studies, the author found four departments have a key role in SMEs, these four departments are; department of design, department of production, department of planning and department of procurement. Collaborative has many ways and many tools; one of these tools is E-collaboration. As some authors illustrated that the use of E-collaboration technologies is essential for supporting projects (Qureshi et al., 2005). Electronic collaboration technologies have created an information utility that is accessible, cost-effective and useful for a broad range of applications (Mohammadjafari et al., 2010a). E-collaboration can play a vital role in addressing many problems among the participating companies (Mohammadjafari et al., 2010d). Electronic collaboration technologies have created an information utility that is accessible, cost-effective and useful for a broad range of applications. On the other hand, in many industries, project management has become a way to better working (Mohammadjafari et al., 2009). Project management is a methodology for managing a project (Mohammadjafari et al., 2011b).

Project management is an integral part of human evolution and has been considered in many sciences (Mohammadjafari et al., 2010c). Project management can be defined as the process of controlling the achievement of the project objectives (Mohammadjafari et al., 2011a). In this study, we review and introduce E-collaboration, project management, new product and SMEs and describe about some study published about reduce time and cost.

METHODOLOGY

This review study is based on reliable publications. It covers aspects like SMEs characteristics, scope of reduce time and cost by E-collaboration through project management approach. The articles are collected from the famous journals and books related to the topic published since 1996.

There is a poor track record considering on the reduce time and cost by e-collaboration through project management with together. Just a few studies have been done around this subject. In order to prove this allegation, the distribution of published articles per year extracted from Web of Science database is demonstrated in Fig. 1 and 2. However, the tendency of publication has shown that E-collaboration, SMEs, project management and new product are an interesting topic. In order to prove this assertion, the distribution of published articles per year extracted from Web of Science database is demonstrated in Fig. 3-6.

Therefore, in order to find out formations, actives and management involvement in the field, we consider to a broader scale of literature. The used references contain approximately 55 articles out of 200 selected articles, which were taken out from 670 pre-investigated items.


Fig. 1: Trend of E-collaboration, project management and new product (http://www.isiknowledge.com)


Fig. 2: Trend of E-collaboration, project management and SMEs (http://www.isiknowledge.com)

E-COLLABORATION

Concept of E-collaboration: For better understanding, the authors describe the meaning of E-collaboration. E-collaboration is collaboration among different individuals to accomplish a joint task using electronic technologies (Cai and Kock, 2009).


Fig. 3: Trend of E-collaboration (http://www. isiknowledge.com)


Fig. 4: Trend of project management (http://www. isiknowledge.com)


Fig. 5: Trend of SMEs (http://www.isiknowledge.com)


Fig. 6: Trend of new product development (http://www. isiknowledge.com)

The categories and tools of E-collaboration are different, as below:

Categories of collaborative tools: There are four categories of electronic collaboration.

Computer conferencing: Space for asynchronous and threaded discussions as well for real-time text talk and real-time discussions is provided and files and documents are shared. There is a possibility that users see and work on documents simultaneously, or on each other’s screen, or on a whiteboard and mailing capabilities are also provided. Audio and video conferencing are quite common (Bafoutsou and Mentzas, 2002).

Electronic meeting systems (EMS): Meeting conduction is the basic functionality of the EMS category. Meetings can either be regular (same time, same place), synchronous (same time, different place), or asynchronous (different time, different place). Meeting participants are notified through email and have the possibility to chat, conduct real-time discussions, use audio and video conferencing facilities, write or draw in real-time on a blank slide, participate in surveys-anonymously if preferred-and make group decisions, share documents and files, show and annotate PowerPoint slides, share live software applications and even work simultaneously on documents. Apart from the work-centered activities, the team also engages in team-centered activities, including, greeting and seeking additional participants, introduction and parting. Finally, meeting-centered activities support the meeting process, including its set-up, maintenance of the agenda and minutes and distribution of the minutes after the meeting (Poltrock and Engelbeck, 1999; Bafoutsou and Mentzas, 2002).

Group file and document handling: The core functionalities of this category involve working with documents and files. In the simplest form, users only have a shared view of files/documents, while advancing; there is also a possibility for individual editing, document/file management and storing in a central database, as well as collective authoring and revision of documents. Synchronous work on documents can also be a part of a group document-handling tool. In addition, basic communication capabilities, such as e-mail notifications and e-mail, are provided (Bafoutsou and Mentzas, 2002).

Electronic workspace: The primary idea is to provide teams with a common space to coordinate and organize their work. Groups can centrally store documents and files, work with them, solve problems through discussion, keep to-do lists and address books with information about group contacts and even track project milestones and project interactions. There are workspaces for different groups and users may be members of several workspaces with each workspace corresponding to each project a user is involved with (Bentley et al., 1997; Bafoutsou and Mentzas, 2002). Table 1 shows this category.

In this study, the author used electronic workspace for the relationship between four departments and project management.

The value of E-collaboration: Collaborative in different industries is essential for supporting projects. E-collaboration and collaborative tools bring geographically dispersed teams together for virtual meetings across great distances.


Table 1: Gives a list of the systems examined as well as the category each tool belongs to Bafoutsou and Mentzas (2002)

These results in tremendous time and cost saving, greatly decreased travel requirements, faster and better decision-making and improved communications flow throughout the organization (Bafoutsou and Mentzas, 2002). The field of collaborative computing encompasses the use of computers to support coordination and cooperation of two or more people who attempt to perform a task or solve a problem together (Borenstein, 1992).

PROJECT MANAGEMENT

Why does project exist?: For better understanding the concept of project management first, we express why the project exists. First, a project exists because there is something important and complex to be solved. Second, a project organization exists because there is a need for a purposeful organization effort and a high need of coordination in order to execute a number of tasks/activities (Soderlund, 2004).

What is project management?: Project management is a methodology for managing a project (Ramaprasad and Prakash, 2003). Project management, including the tools, techniques and knowledge-based practices applied to manage the creation of products and services, is becoming an increasingly accepted and applied discipline across industry sectors (Jugdev et al., 2007).

Project management is the manner of implementation, of expertise, paraphernalia, knowledge and modus operandi to an extensive range of activities for the fulfillment of prerequisite of the specific project (Qureshi et al., 2009).

Importance of project management: From many industries, project management has become a way to better working Like Filippov, S has illustrated project management has become a distinctive way to manage business activities nowadays (Filippov and Mooi, 2009). Project management is becoming a key strategy for managing organizational change in contemporary organizations, with corporations, government, academia and other organizations recognizing the value of common project approaches and of educated employees for the execution of projects (Van Rooij, 2009). Most of all, project managers are in the front-line when it comes to assuring customer satisfaction (Kirsila et al., 2007).

Project management area: Projects are typically part of an organization. The relationship between the project and organization varies and that relationship affects the scope of project management responsibilities. Although, the nature of project management responsibility varies by organization and by project within an organization, project management encompasses many areas. The Project Management Institute's (PMI) list of project management areas, summarized in Table 2, provides a sense of the breadth of the project management task. The Project Management Book of Knowledge provides the comprehensive description of activities associated with each area, the interaction of the areas with the key project management processes described earlier, available management tools and techniques for each area and input and outputs of each area (Jacobson et al., 2006).

DEFINITION OF SMALL AND MEDIUM ENTERPRISES

According to Ale Ebrahim et al. (2009) there are many accepted definitions of SMEs in addition the classifications vary from industry to industry and from country to a country, different countries accept dissimilar criteria such as employment, sales or investment for defining small and medium enterprises. In the absence of a definitive classification, a consensus has developed around the European Commission (EC) criteria for SME classification; this definition adopts a quantitative four approach emphasizing tangible criteria, employee numbers (Fewer than 250 employees), turnover (<50 million) and balance sheet statistics (<43 million) (Ale Ebrahim et al., 2009).

Import of SMEs: Small and Medium Enterprises (SMEs) play an important role to promote economic development (Ale Ebrahim et al., 2009). In most countries, small and medium enterprises (SMEs) dominate the industrial and commercial infrastructure (Deros et al., 2006).


Table 2: Project management areas adapted from project management institute

SMEs play a very important role in national economies, providing job opportunities, act as supplier of goods and services to large organizations and any lack of product quality could adversely affect the competitive ability of the larger organizations (Deros et al., 2006). All firms are indeed the engines of global economic growth (Acs et al., 1997). SMEs play an important role in flows of foreign direct investment (Kuo and Li, 2003). SMEs also serve as the key engine behind equalizing income disparity among workers (Choi, 2003). Small and medium-sized enterprises are increasingly internationalizing their business activities (Beck et al., 2005).

Strengths of SMEs: For better understanding of SMEs actions, summary information of the SMEs characteristics is listed in Table 3.

NEW PRODUCT

New Product Development (NPD) is a business process for developing new products for a company, whether it is an upgrade of an existing product or a new concept (either for the company or for the customer). It includes all activities from the development of an idea or a concept for a product, to the realization of the product during the production stage and its introduction into a market place (Hohenegger et al., 2007).

New product development process: New Product Development (NPD) is a complex process. Unlike most business processes, each instance differs from the previous ones, its output is not clearly foreseen defined and many of the activities to be accomplished is knowledge intensive (Carbonara and Scozzi, 2006). Among them, idea generation, product design, prototype and engineering are the most relevant (Carbonara and Schiuma, 2004). NPD performance depends not only on the effectiveness and on efficiency of activity accomplishment, but also on the degree of integration among them. The integration requires the adoption of mutual adjustment coordination mechanisms, lateral communications and repeated problem solving techniques (Carbonara and Scozzi, 2006). Dougherty (1992) identifies three dangerous routines: actors’ habit to work within their role and communicate with the same persons, the use of predefined definitions of the market/technology relationship and the use of standards and working methods (such as the payback period, return of investments, etc.) not coherent with NPD (Dougherty, 1992). The degree of integration among the different NPD activities is also related to the effectiveness and efficiency of the knowledge transfer processes activated within NPD (Carbonara and Scozzi, 2006). NPD can be improved by identifying approaches and tools to support the creation of shared mental models (Carbonara and Scozzi, 2006). In the literature, few studies deal with methods and tools to support NPD (Presley et al., 2000). Quality Function Deployment (QFD) and Design To Manufacturability Charts have been, for example, proposed to support the design of new products and, in particular, to take into account the needs of customers (upstream) and anticipate eventual problems with manufacturing (downstream) (Carbonara and Scozzi, 2006).

KEY FACTORS FOR REDUCE TIME AND COST

In order to succeed, companies must deliver projects on time and within budget and meet specifications while managing project risk (Raymond and Bergeron, 2008).The effective factors for reduce time and cost have been discussed by many researchers. In order to realize the objectives of the study, only four factors are used. These factors are design, planning, product, procurement, as shown in Table 4.

Design factor: Zhou et al. (2008) has supposed a WWW-based collaborative between designer and engineers in the different department is effective to reduce the amount of reworks and shorten the product development cycle. The author has developed a www-based Collaborative Design and Manufacturing System (WCDMS) for integrated mould product development.


Table 3: Strengths characteristics of SMEs

Table 4: The key factors for reduce time and cost based on literature review

However, in the injection molding enterprises, the product information, tool information and manufacturing information is the most important information to hold up the collaborative mould product development. Xie et al. (2002) has presented a www-based information management system for rapid and integrated mould product development. The system was built in two parts, information management system and an integrated platform. The first part includes distributed relational databases, STEP databases and knowledge bases, WWW Database Tool (WDT) and user interfaces for the different departments of the company, to manage the product information. The second part includes a collaborative communication tool, an information access tool, an Incremental Process Planning (IPP) user interface and a cost optimization model. This platform is developed by using current WWW development tools. The application tools are developed as agents that run in a distributed environment. Roemer and Ahmadi (2010) presented two advances that harmonize production streams through the manufacturing system for reducing manufacturing lead times. Selvaraj et al. (2009) has presented that one of the ways for reducing time and cost is design for manufacturing, the author sketch outs the DFMA considerations to sheet metal parts considering things such as homogeny of numerical profiles and integral part design through parts count reduction. M Roberts has defined the (SAE) service assembly environment including the design phase of a product is important for Improving product times and the author use the intelligent network’s area (Roberts, 2006). Lifang et al. (2009) illustrated that modular component parts for designing product can develop time of new product ,the author prove this idea with mathematic model. Tan and Vonderembse (2006) has proved the use of CAD technology develop product development performance (development time, product quality and design productivity) and to reduce product costs.

Planning factor: Xia-Bao and Li-Xi (2009) has illustrated that four steps involved defining a project, identifying a critical chain, setting buffers and constructing the project plan, is important to set lead-time. For proving an approach the author uses a simulation experiment. Hebert and Deckro (2010) has proven by combining software project for planning like Microsoft project and traditional programming concurrently, the time and cost of construction projects decrease.

Product factor: Xie et al. (2002) has designed a Web-based information management system in the production line for rapid and integrated product development. Roemer and Ahmadi (2010) presented two advances that harmonize production streams through the manufacturing system for reducing manufacturing lead times. Griffin (1997) has proved the cross-functional teams are important for development cycle time. Bashir (2008) has done a modeling of development time for hydroelectric generators. The model uses three factors, namely, product complexity, involvement of partners in the development process and generator speed. Building of the model is based on the use of past data from earlier finished projects.

Clift and Vandenbosch (1999) contrast the long and short cycle projects time, the short cycle complex projects run by leaders and use external sources of information also they were formal in their approach in NPD project management. However, in long cycle project leaders hold on to standardize and use less external sources of information. Finally, it is evidenced short cycle complex projects require a different type of management process.

Procurement factor: Langerak and Hultink (2008) has proven five factors is important for acceleration approaches on development speed, (i.e., supplier involvement, lead user involvement, speeding up activities and tasks, training and rewarding of employees and simplification of organizational structure). Petersen et al. (2005) has illustrated that the supplier integration is important for reduce new product time, increase cost and also better quality. Hartley et al. (1997) illustrated managing the buyer-supplier interface is important for on-time performance in product development.

CONCLUSION

In this study, we represented a number of definitions about theoretical of E-collaboration, project management, SMEs and new product. Our findings emphasis that SMEs cannot challenge in the market, unless they do their need customer, for achieving this subject, they have to reduce time and cost for production. Collaboration is one of the ways to success production in manufacturing. However, collaboration has some tools; one of these tools is electronic collaboration. This study is just a review about the importance of some departments in SMEs for reducing time and cost, these departments are design, planning, procurement and production. Future research can improve new product by this information in the manufacturing companies.

REFERENCES
Abdul-Nour, G., J. Drolet and S. Lambert, 1999. Mixed production, flexibility and SME. Comput. Ind. Eng., 37: 429-432.
CrossRef |

Acs, Z.J., R. Morck, J.M. Shaver and B. Yeung, 1997. The internationalization of small and medium-sized enterprises: A policy perspective. Small Bus. Econ., 9: 7-20.
Direct Link |

Ale Ebrahim, N., S. Ahmed and Z. Taha, 2009. Virtual R & D teams in small and medium enterprises: A literature review. Scientific Res. Essays, 4: 1575-1590.
Direct Link |

Aragon-Sanchez, A. and G. Sanchez-Marin, 2005. Strategic orientation, management characteristics and performance: A study of Spanish SMEs. J. Small Bus. Manage., 43: 287-308.
CrossRef |

Bafoutsou, G. and G. Mentzas, 2002. Review and functional classification of collaborative systems. Int. J. Inform. Manage., 22: 281-305.
CrossRef |

Bashir, H.A., 2008. Modeling of development time for hydroelectric generators using factor and multiple regression analyses. Int. J. Project Manage., 26: 457-464.
CrossRef |

Beck, T., A. Demirguc-Kunt and R. Levine, 2005. SMEs, growth, and poverty: Cross-country evidence. J. Econ. Growth, 10: 199-229.
Direct Link |

Bentley, R., W. Appelt, U. Busbach, E. Hinrichs and D. Kerr et al., 1997. Basic support for cooperative work on the World Wide Web. Int. J. Human-Comput. Stud., 46: 827-846.
Direct Link |

Borenstein, N.S., 1992. Computational mail as network infrastructure for computer-supported cooperative work, ACM. Proceedings of the 1992 ACM Conference on Computer-Supported Cooperative Work, (CCSCW'92), Toronto, Ontario, Canada, pp: 67-74.

Cai, G. and N. Kock, 2009. An evolutionary game theoretic perspective on e-collaboration: The collaboration effort and media relativeness. Eur. J. Operational Res., 194: 821-833.
Direct Link |

Carbonara, N. and B. Scozzi, 2006. Cognitive maps to analyze new product development processes: A case study. Technovation, 26: 1233-1243.
CrossRef |

Carbonara, N. and G. Schiuma, 2004. The new product development process within industrial districts: A cognitive approach. Int. J. Product Dev., 1: 92-106.
Direct Link |

Choi, T.Y., 2003. Korea�s small and medium-sized enterprises: Unsung heroes or economic laggards. Acad. Manage. Executive, 17: 128-129.

Clift, T.B. and M.B. Vandenbosch, 1999. Project complexity and efforts to reduce product development cycle time. J. Bus. Res., 45: 187-198.
Direct Link |

Davis, C.H. and E. Sun, 2006. Business development capabilities in information technology SMEs in a regional economy: An exploratory study. J. Technol. Transfer, 31: 145-161.
CrossRef |

Deros, B.M., S.M. Yusof and M.A. Salleh, 2006. A benchmarking implementation framework for automotive manufacturing SMEs. Benchmarking Int. J., 13: 396-430.
Direct Link |

Dougherty, D., 1992. Interpretive barriers to successful product innovation in large firms. Organization Sci., 3: 179-202.
Direct Link |

Egbu, C.O., S. Hari and S.H. Renukappa, 2005. Knowledge management for sustainable competitiveness in small and medium surveying practices. Structural Survey, 23: 7-21.
CrossRef |

Filippov, S. and H. Mooi, 2009. Innovation project management: A research agenda. http://www4.pucsp.br/icim/ingles/downloads/papers/TL_038.pdf.

Gassmann, O. and M.M. Keupp, 2007. The competitive advantage of early and rapidly internationalising SMEs in the biotechnology industry: A knowledge-based view. J. World Bus., 42: 350-366.
CrossRef |

Gray, C., 2006. Absorptive capacity, knowledge management and innovation in entrepreneurial small firms. Int. J. Entrepreneurial Behav. Res., 12: 345-360.
Direct Link |

Griffin, A., 1997. The effect of project and process characteristics on product development cycle time. J. Marketing Res., 34: 24-35.
Direct Link |

Haga, T., 2005. Action research and innovation in networks, dilemmas and challenges: Two cases. AI Society, 19: 362-383.
CrossRef |

Hartley, J.L., B.J. Zirger and R.R. Kamath, 1997. Managing the buyer-supplier interface for on-time performance in product development. J. Operations Manage., 15: 57-70.
CrossRef |

Hebert, J.E. and R.F. Deckro, 2010. Combining contemporary and traditional project management tools to resolve a project scheduling problem. Comput. Operations Res., 38: 21-32.
CrossRef |

Hohenegger, J., A. Bufardi, A. Bufardi and P. Xirouchakis, 2007. A new concept of compatibility structure in new product development. Advanced Eng. Informatics, 21: 101-116.
Direct Link |

Huang, X., G.N. Soutar and A. Brown, 2001. Resource adequacy in new product development: A discriminant analysis. Eur. J. Innovation Manage., 4: 53-59.
Direct Link |

Jacobson, N., S. Daswani and P.H. Gesteland, 2006. Project Management. Academic Press, Burlington, pp: 493-506.

Jugdev, K., G. Mathur and T.S. Fung, 2007. Project management assets and their relationship with the project management capability of the firm. Int. J. Project Manage., 25: 560-568.
CrossRef |

Jutla, D., P. Bodorik and J. Dhaliwal, 2002. Supporting the e-business readiness of small and medium-sized enterprises: Approaches and metrics. Internet Res. Electronic Networking Appl. Policy, 12: 139-164.
Direct Link |

Kim, K.S., S.C. Jones and T.L. Knotts, 2008. Characterizing viability of small manufacturing enterprises (SME) in the market. Exp. Syst. Appl., 34: 128-134.
CrossRef |

Kirsila, J., M. Hellstrom and K. Wikstrom, 2007. Integration as a project management concept: A study of the commissioning process in industrial deliveries. Int. J. Project Manage., 25: 714-721.
CrossRef |

Kuo, H.C. and Y. Li, 2003. A dynamic decision model of SMEs FDI. Small Bus. Econ., 20: 219-231.
Direct Link |

Langerak, F. and E.J. Hultink, 2008. The effect of new product development acceleration approaches on development speed: A case study. J. Eng. Technol. Manage., 25: 157-167.
CrossRef | Direct Link |

Lawson, C.P., P.J. Longhurst and P.C. Ivey, 2006. The application of a new research and development project selection model in SMEs. Technovation, 26: 242-250.
CrossRef |

Lifang, W., R. De Matta and T.J. Lowe, 2009. Updating a modular product: How to set time to market and component quality. Eng. Manage. IEEE Trans., 56: 298-311.
CrossRef |

Mezgar, I., G.L. Kovacs and P. Paganelli, 2000. Co-operative production planning for small- and medium-sized enterprises. Int. J. Prod. Econ., 64: 37-48.
CrossRef |

Mohammad Jafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2009. WWW-based collaboration in reducing production time in SMEs: A review. Proceedings of the 6th International Conference on Information and Communication Technology Management, Tehran, Iran. http://medicica.com/EnPaper-ICTM06-ICTM06_200.html.

Mohammadjafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2010. Reducing time and cost of new product development in SMEs by E-collaboration through project management approach. Int. SCIE J. Adv. Sci. Lett.,

Mohammadjafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2010. The relationship between project management and E-collaboration. Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Jan. 910, Dhaka, Bangladesh, pp: 31-36.

Mohammadjafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2010. The importance of E-collaboration in SMEs. Project management approach: A review. International Congress on Engineering Education, Kuala Lumpur, Malaysia.

Mohammadjafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2011. A conceptual model for development of new product in SMEs by E-collaboration and project management. AIPEMS.,

Mohammadjafari, M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2011. A review of literature on reducing time and cost of new product in SMEs through project management by E-collaboration. 2011 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur-Malaysia.

Mohammadjafari, M.M., S. Ahmed, S.Z.M. Dawal and H. Zayandehroodi, 2010. The effects of electronic collaboration in reducing production time: Product design process in SMEs. Proceedings of the International Multi Conference of Engineers and Computer Scientists, March 17-19, Hong Kong, pp: 1-5.

Petersen, K.J., R.B. Handfield and G.L. Ragatz, 2005. Supplier integration into new product development: Coordinating product, process and supply chain design. J. Operations Manage., 23: 371-388.
CrossRef |

Poltrock, S.E. and G. Engelbeck, 1999. Requirements for a virtual collocation environment. Inform. Software Technol., 41: 331-339.
CrossRef |

Presley, A., J. Sarkis and D. Liles, 2000. A soft-systems methodology approach for product and processinnovation. IEEE Trans. Eng. Manage., 47: 379-382.
Direct Link |

Qureshi, S., L. Min and D. Vogel, 2005. A grounded theory analysis of e-collaboration effects for distributed project management. Proceedings of the 38th Annual Hawaii International Conference on System Sciences, (AHICSS'05), University of Nebraska Omaha, Hong Kong, pp: 264.3-264.3.

Qureshi, T.M., A.S. Warraich and S.T. Hijazi, 2009. Significance of project management performance assessment (PMPA) model. Int. J. Project Manage., 27: 378-388.
CrossRef |

Ramaprasad, A. and A.N. Prakash, 2003. Emergent project management: How foreign managers can leverage local knowledge. Int. J. Project Manage., 21: 199-205.
CrossRef |

Raymond, L. and F. Bergeron, 2008. Project management information systems: An empirical study of their impact on project managers and project success. Int. J. Project Manage., 26: 213-220.
CrossRef |

Roberts, M., 2006. Improving product launch times and product design through a service assembly environment. BT Technol. J., 24: 107-116.
CrossRef | Direct Link |

Roemer, T.A. and R. Ahmadi, 2010. Models for concurrent product and process design. Eur. J. Operational Res., 203: 601-613.
CrossRef |

Schatz, C., 2006. A methodology for production development�the body of knowledge approach. Ph.D. Thesis, Norwegian University of Science and Technology, Department of Productions and Quality Engineering.

Selvaraj, P., P. Radhakrishnan and M. Adithan, 2009. An integrated approach to design for manufacturing and assembly based on reduction of product development time and cost. Int. J. Adv. Manuf. Technol., 42: 13-29.
CrossRef | Direct Link |

Sharma, M.K. and R. Bhagwat, 2006. Practice of information systems: Evidence from select Indian SMEs. J. Manuf. Technol., 17: 199-223.
CrossRef | Direct Link |

Soderlund, J., 2004. Building theories of project management: Past research, questions for the future. Int. J. Project Manage., 22: 183-191.
CrossRef |

Tan, C.L. and M.A. Vonderembse, 2006. Mediating effects of computer-aided design usage: From concurrent engineering to product development performance. J. Operat. Manage., 24: 494-510.
CrossRef |

Van Rooij, S.W., 2009. Scaffolding project-based learning with the project management body of knowledge (PMBOK�). Comput. Educ., 52: 210-219.
Direct Link |

Xia-Bao, H. and Y. Li-Xi, 2009. Setting lead-time in project manufacturing environment based on CCPM. Proceedings of the International Conference on Apperceiving Computing and Intelligence Analysis, ICACIA 2009, Oct. 23-25, Chengdu, pp: 407-410.

Xie, S.Q., H. Huang and Y.L. Tu, 2002. A WWW-based information management system for rapid and integrated mould product development. Int. J. Adv. Manuf. Technol., 20: 50-57.
CrossRef | Direct Link |

Zhou, Z., Q. Ai, Q. Liu and S. Xie, 2008. A WWW-based collaborative design and manufacturing system for rapid mould product development. Proceedings of the IEEE International Conference on Industrial Technology, April 21-24, Chengdu, pp: 1-6.

No comments:

Post a Comment